There are many options when you need to splice wires. In addition to formal two-piece connectors, there’s the widely used ...

Polarity is important with LEDs, so ensure that the red wire connects to a positive 12-volt power source and the black wire is to ground. Use crimp butt connectors with heat-shrink collars to connect ...

This latest issue appears to be at least partially user error, but the continued problems with Nvidia's 12V-2x6 power connector on a range of cards suggest that a redesign might be in order.

Called the DD31PS series, they are effectively two connectors in one, with a end to match the on-board receptacle at one end, and push-in wire sockets at the other. They are all double-row connectors ...

The MCVH connectors, featuring crimp termination, are built to withstand mechanical stresses such as vibration, shock, ... Mencom also offers both male and female crimp pins for various wire gauge ...

The author connected six shunt resistors R002 (0.002 Ohm) to each 12V cable. The developed board has a USB connector on the back. Technically, the signals can be used for monitoring or even some ...

For example, FSP has developed a 12V-2×6 cable that incorporates a thermistor. This sensor monitors the temperature in real time at the GPU connector, and if it reaches around 110°C, it triggers ...

The series single-row connector uses a box-shaped contact design that ensures contact stability from above and below. The box-shaped contact on the cable side also stops deformation when handling the ...

Hirose has expanded its SignalBee connector platform to include a smaller wire-to-board version. With a height of 1.45mm and a depth of 3.55mm, the new DF53 Series connector is the industry’s smallest ...

Sanwa Supply’s new 240W USB-C cable has a rotating connector that bends 180 degrees to help reduce strain and damage on the cable and ports. We should all strive to be as flexible as this cable.

Ideally, this should be at least 12V and may be your stereo or outlet even. You can connect the lights in your vehicle's fusebox. Be sure to ground the negative power wire which will require a ...

The question is, will Intel and AMD stick with the traditional 8-pin PCIe connectors for its next-gen GPUs or shift to the new 12V-2x6 PCIe standard.