And even where an assembly process is complicated enough to warrant automatic crimping, there are still multiple steps involved in completing the crimp — stripping insulation, inserting the wire ...

Putting crimp connectors on wires is one of the most tedious things you’ll do. ... and it eliminates the need to strip the right amount of insulation off of a wire before crimping on the contact.

For a crimp that’s strong, the wire diameter must match the connector using the AWG (American Wire Gauge) standard. The wire size is marked on the spool and the insulation. To make matchups easy, the ...

Slide the seal over the wire insulation with the more slender collar toward the bitter end, where it will be crimped in place. The DL 090 pins require a two-step crimp on the bare wire using a 1.25 mm ...

There are many options when you need to splice wires. In addition to formal two-piece connectors, there’s the widely used ...

Connector Types . Electrical crimp connectors come in dozens of different materials and styles: nylon, PVC, non-insulated, ...

There are certain critical factors in crimping that are necessary to create a proper cold welded crimp, ideal connector to wire interaction and insulation material support. Properly accomplishing all ...

Wires can wear out or get damaged from rodents or corrosion, so it’s common to need to splice them from time to time. You ...

(3) Crimp tool has one small anvil to crimp wire directly to the metal connector pin. Once this is accomplished, use the larger anvil to crimp the strain relief over the insulated portion of the wire.

Compared to crimp connectors, ... A solder seal butt connector for 10-12 gauge wire. ... sealing the connector to the insulation around the wires, ...

AVX Corporation has significantly redesigned its well-established, surface mount, wire-to-board 9175 and 9176 insulation displacement connector (IDC) Series to both simplify ...